PRODUCT CENTER
Product center
HIGH POWER BLDC MOTOR FOC CONTROLLER
72V/100A BLDC MOTOR FOC CONTROLLER
Main Technical Parameters And Operation Characteristics
- Rated operation voltage: 48-96V
- Rated DC BUS current: 60A-150A
- Rated output power: 2000W-5000W
- Motor control mode: FOC
- Speed limit: Controlled by motor and configuration
- Over-voltage protection: Battery voltage is higher than default value
- Under-voltage protection: Battery voltage is lower than default value
- Motor over-current protection: Motor phase is short-circuit or phase to ground is short-circuit
- Motor over-heat protection: Motor temperature is higher than default value
- Stalling protection: Motor stalling time is over default value
- Throttle protection: Throttle input is abnormal
- Controller over-heat protection: When controller operation temperature is higher than default value
- Self-checking error protection:System internal power-on self-checking is abnormal
- MOSFET protection: MOSFET self-checking is abnormal
- HALL protection: HALL input is abnormal
ADVANTAGE
Direct torque control，smooth start-up，excellent acceleration performance，especially in slow speed.
control sinusoidal current injection and smooth motor output torque, which fully suppress the low frequency noise caused by the fluctuations of motor torque.
·Signal integrity detection (motor interface signal, control signal, etc.)
·Over-current protection, over or under voltage protection and over-temperature protection.
·Provide motor temperature-control interface